[RE-wrenches] OB Radian question

Jay jay.peltz at gmail.com
Sat May 7 21:43:10 EDT 2022


Get a section of 8” gutter. 
It will fit nicely under the inverter. 
Obviously cutting holes in the top for all the wire, inverter connections. 

I haven’t tried the vfx covers but it’s the same plastic insulated connectors, should fit. 
Jay

> On May 7, 2022, at 6:12 PM, Kirk Herander via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
> 
> 
> Further Clarification, Overcurrent protection etc. already exists, i’m not about to spend another $1k or more to replace it. 
> 
>> On Sat, May 7, 2022 at 7:56 PM Jerry Shafer via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
>> Just get an empty GSLC, at least it has the breakers
>> Jerry
>> 
>>> On Sat, May 7, 2022, 1:44 PM Kirk Herander via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
>>> Ok, time to break wrenches radio silence over the last week.
>>> 
>>> My question concerns the Radian battery terminal connections. I don't need nor want to use the expensive GSLC box in a 23-y.o. off-grid upgrade to a Radian. That means the battery-to-inverter connections will be exposed, unless I find another way to enclose them.
>>> 
>>> Do those OB snap-on terminal covers used with the FX series work with the Radian? Any other ideas? 
>>> 
>>> Thanks. Over and out.
>>> --
>>> Kirk Herander / kirkh at vermont.solar
>>> Owner|Principal, VT Solar, LLC
>>> Celebrating our 31st Anniversary 1991-2022!!
>>> www.vermont.solar
>>> dba Vermont Solar Engineering
>>> 802.863.1202
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>> 
>>> Pay optional member dues here: http://re-wrenches.org
>>> 
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>> 
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>> 
>>> There are two list archives for searching. When one doesn't work, try the other:
>>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>> 
>>> List rules & etiquette:
>>> http://www.re-wrenches.org/etiquette.htm
>>> 
>>> Check out or update participant bios:
>>> http://www.members.re-wrenches.org
>>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> Pay optional member dues here: http://re-wrenches.org
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> There are two list archives for searching. When one doesn't work, try the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>> 
> -- 
> Kirk Herander / kirkh at vermont.solar
> Owner|Principal, VT Solar, LLC
> Celebrating our 31st Anniversary 1991-2022!!
> www.vermont.solar
> dba Vermont Solar Engineering
> 802.863.1202
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20220507/c6da4a89/attachment.htm>


More information about the RE-Wrenches mailing list