[RE-wrenches] Sol-Ark grid tie question

[No Name]

It absolutely does. It works well in that scenario as well. No battery? No
problem until the client decides to purchase and install some storage!

Pretty versatile compared to a truly "Battery Based Inverter" like
Schneider/Outback. .

On Fri, Apr 1, 2022, 9:29 AM Jason Szumlanski via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> If you set up the inverter in a straight grid tie mode, does it still pass
> power through to the load terminals when on grid?
>
> I ask this, because a client wants us to connect it with a backup load
> panel but no battery right now. He wants to add the battery later.
>
> My other thought is to install a bypass switch to pass grid power directly
> to the subpanel, which would act as a service bypass for the future anyway.
>
> Jason Szumlanski
> Florida Solar Design Group
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20220401/389647fa/attachment.htm>