[RE-wrenches] ballasted ground mounts residential scale

[Jeff Clearwater]

Wow cool product Nick!  Anyone have actual experience?

I've been thinking that the concrete beam systems (above grade 
pre-engineered rectangular blocks like solarmounts.com) really could be 
used for any ground mount rack system (Unirac, IronRidge, SnapNRack, 
SolarMounts, ReadyRack, etc.)  in other words many ground mount systems 
could be bolted to an above grade concrete beam - would just need a sign 
off on uplift by an engineer at the worst or just apply existing 
engineering models.  Many manufacturers already off that option and 
probably provide the engineering.

This might expand small system options for those manufacturers only 
offering ballast systems to large system buyers.

Which makes me think that If I tried a Nuance system and the soil didn't 
work out for the cable pull you could then just bolt them down to a 
concrete beam system as a plan b.

Thoughts?  Experience anyone?

best,

jc



> Nick A Lucchese <mailto:lucchesesolar at me.com>
> December 30, 2021 at 11:38 AM
> Greetings Mac,
>
> I recently have been investigating the use of Nuance’s Osprey 
> <https://nuanceenergy.com/> product solution. Doesn’t necessarily fall 
> under the ballasted category and since you’re trying to avoid the heat 
> pump lines it may not fit your strategy either but I really like the 
> option of getting away from pouring concrete. The anchors are set 
> 40-65” deep. For smaller projects it seems like the cost may be 
> somewhat prohibitive due to shipping logistics but appears like they 
> price out affordably once you purchase a bit of specialized equipment 
> and get around the freight costs.
>
> That ReadyRack geo-ballast looks quite cool too Jeff, thanks for the 
> link on that.
>
> Best of luck, Nick
>
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try 
> the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
> Mac Lewis <mailto:maclewis1 at gmail.com>
> December 28, 2021 at 3:31 PM
> Hello Wrenches,
>
> Can anyone recommend a ballasted ground mount solution that is offered 
> on a residential scale? Below 10kW typically.
>
> Thanks in advance!
>
> -- 
>
>
>
> Mac Lewis
>
> *
>
> "Yo solo sé que no sé nada." -Sócrates
>
> *
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try 
> the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20211230/57539a71/attachment.htm>