[RE-wrenches] Trace 4024 cutting out
Dave Angelini Offgrid Solar
offgridsolar at sti.net
Mon Oct 18 11:25:10 EDT 2021
I meant to say full load test it with a couple of 1500 watt heaters.
Dave Angelini Offgrid Solar
"we go where powerlines
don't"
http://members.sti.net/offgridsolar/ [1]
e-mail offgridsolar at sti.net
[2]
text 209 813 0060
On Mon, 18 Oct 2021 08:21:44 -0700, Dave Angelini
Offgrid Solar wrote:
Load test it! It may be the last time. It also
might be bad contacts on the transfer switch. A good tech can switch AC1
and AC2 or may have the relay.
Dave Angelini Offgrid Solar
"we go where
powerlines don't"
http://members.sti.net/offgridsolar/ [3]
e-mail
offgridsolar at sti.net [4]
text 209 813 0060
On Mon, 18 Oct 2021 08:11:33
-0700, frenergy wrote:
Chris and Jerry,
Sorry, I forgot to mention I
did exactly that, had the Fluke clipped to the + and (-) of the pack and
watched it as load was applied. Yes, voltage fell but never got below
~24.4V when the inverter output stopped. Checked tightness of all battery
connections, terminal to terminal cables, virtually no corrosion anywhere.
Also, inverter stayed ON, just the output cut-out, then back on then off,
then......
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291
Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic
874049
www.frenergy.net [5]
On 10/18/2021 7:14 AM, Jerry Shafer wrote:
Look at the batteries, use a meter right at the bolts going in to the
inverter, sounds like low voltage cut out.
On Sun, Oct 17, 2021, 9:07 PM
frenergy wrote: Hey Folks,
I haven't seen this one until yesterday.
Customer with a
20 year old Trace SW4024 called. I've been servicing this
reliable
system for the last 8 years. He said after a delay the power
shuts off
when a moderate load comes on after 5-15 seconds, then back on,
then
off..... Light loads no problem, the power stays on. The inverter
stays on the entire time (yellow light and that famous audio buzz) but I
hear a relay? inside the left side of the wiring section with each
change
of on-off, off-on state. I assume its a repair to a service
shop. Ideas?
Recommendations for repair shops? I haven't been getting
a response from
the Solar Cowboyz in Grass Valley.
Thanks,
Bill
Feather River Solar
Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
solar powered since 1982
[7]
Virus-free. www.avast.com [8]
Links:
------
[1]
http://members.sti.net/offgridsolar/
[2] mailto:offgridsolar at sti.net
[3]
http://members.sti.net/offgridsolar/
[4] mailto:offgridsolar at sti.net
[5]
http://www.frenergy.net
[6] mailto:frenergy at psln.com
[7]
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon
[8]
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20211018/63934426/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: blocked.gif
Type: image/gif
Size: 118 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20211018/63934426/attachment.gif>
More information about the RE-Wrenches
mailing list