[RE-wrenches] Radian Generator Relay

Michael Morningstar mjmorningstar at gmail.com
Tue Sep 14 22:39:58 EDT 2021


All good tips. I will make sure AGS is enabled. Otherwise turn over generator starting to the FNDC. 
Thanks Everyone! 

> On Sep 14, 2021, at 3:59 PM, John Blittersdorf <john.blittersdorf at gmail.com> wrote:
> 
> You may have alteady checked this but make sure AGS is enabled.  I had that problem just this morning and after checking continuity of the wires again noticed that AGS was disabled. 
> 
> John Blittersdorf 
> 
> On Tue, Sep 14, 2021 at 1:55 PM Michael Morningstar <mjmorningstar at gmail.com <mailto:mjmorningstar at gmail.com>> wrote:
> Wrenches,
> 
> I’ve got a Radian 8048/Mate 3S that no longer is activating the relay responsible for generator starting. I’ve power cycled everything and updated firmware. When I attempt to start the generator via the Mate 3S, the relay does not close.
> 
> Any suggestions before I look into replacing the relay/board?
> 
> Which board do I order and what is the best source?
> 
> Many thanks,
> Michael
> 
> 
> 
> 
> 
> 	Michael Morningstar
> 
>      	Morningstar Electric
> 	PO Box 1494
> 	Mount Shasta, California 96067
> 	530-921-0560
> 	CSLB 949635
>  
>   <SmallGif.gif>
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org <http://re-wrenches.org/>
> 
> List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org>
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ <https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/>
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 




	Michael Morningstar

     	Morningstar Electric
	PO Box 1494
	Mount Shasta, California 96067
	530-921-0560
	CSLB 949635
 
  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210914/78df9e17/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SmallGif.gif
Type: image/gif
Size: 4744 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210914/78df9e17/attachment.gif>


More information about the RE-Wrenches mailing list