[RE-wrenches] Radian Generator Relay

[Nick A Lucchese]

Any way you can just use the relay in the Flexnet or maybe there isn’t one installed on that system?

Nick

> On Sep 14, 2021, at 11:15 AM, Michael Morningstar <mjmorningstar at gmail.com> wrote:
> 
> Actually I’m using the 12V relay to activate a battery vent fan. For generator starting, I’m using the dry contact relay for two-wire start. I have the circuit protected by a 2amp fast acting fuse. Fuse is good.
> 
> 
>> On Sep 14, 2021, at 11:10 AM, Tuss, Lones <lones.tuss at enersys.com <mailto:lones.tuss at enersys.com>> wrote:
>> 
>> Hi Michael
>> It sound like you are using the 12 volt aux out on the radian to activate a separate relay.
>> If so disconnect the relay then check and see if the 12 aux attempts to go high (12v dc).
>> If it does it may be a relay issue.
>> The Radian does have an on board relay you could use that instead of a discrete relay.
>> In AGS on the Mate3(s) just select Relay.
>> I hope this helps sir.
>> Take Care
>>  
>>  
>>  
>> From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org <mailto:re-wrenches-bounces at lists.re-wrenches.org>> On Behalf Of Michael Morningstar
>> Sent: Tuesday, September 14, 2021 10:55 AM
>> To: RE-wrenches <re-wrenches at lists.re-wrenches.org <mailto:re-wrenches at lists.re-wrenches.org>>
>> Subject: [RE-wrenches] Radian Generator Relay
>>  
>> CAUTION: This email originated from outside of the Company. Do not click links or open attachments unless you recognize the sender and know the content is safe. 
>> 
>>  
>> Wrenches, 
>>  
>> I’ve got a Radian 8048/Mate 3S that no longer is activating the relay responsible for generator starting. I’ve power cycled everything and updated firmware. When I attempt to start the generator via the Mate 3S, the relay does not close.
>>  
>> Any suggestions before I look into replacing the relay/board?
>>  
>> Which board do I order and what is the best source?
>>  
>> Many thanks,
>> Michael
>>  
>>  
>>  
>> 
>>  
>> Michael Morningstar
>>  
>>      
>> Morningstar Electric
>> PO Box 1494
>> Mount Shasta, California 96067
>> 530-921-0560
>> CSLB 949635
>>  
>>   <image001.gif>
>>  
>> 
>> 
>> This email and any attachments may contain confidential information that is intended only for the recipient(s). If you have received this email in error, please notify the sender and delete it from your system. Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company or its affiliates. This email does not constitute an agreement to conduct transactions by electronic means and does not create any legally binding contract or enforceable obligation in the absence of a fully signed written contract. The recipient should check this email and any attachments for viruses. The company accepts no liability for any loss or damage caused by software viruses. If you are the intended recipient and you do not wish to receive similar email(s) from us in the future then please notify the sender. Please consider the environment before printing. _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> Pay optional member dues here: http://re-wrenches.org <http://re-wrenches.org/>
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org>
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
>> 
>> There are two list archives for searching. When one doesn't work, try the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ <https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/>
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>
>> 
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
>> 
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
> 
> 
> 
> 	Michael Morningstar
> 
>      	Morningstar Electric
> 	PO Box 1494
> 	Mount Shasta, California 96067
> 	530-921-0560
> 	CSLB 949635
>  
>   <SmallGif.gif>
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210914/d945c24f/attachment.htm>