[RE-wrenches] Racking identifaction request

[Chris Worcester]

Hi Jeremy,

Have you seen Zilla racking components? They have some good rails for 4 sided mounting @ zillarac.com 

 

Chris Worcester

Solar Wind Works

Cell 530-448-9692

www.solarwindworks.com

chris at solarwindworks.com

 

From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of Jeremy Coxon
Sent: Wednesday, August 18, 2021 8:21 AM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] Racking identifaction request

 

Strange request here.  I’m trying to identify the type of racking shown in the attached picture.  I have an application for an aluminum rail that is slotted on all 4 sides.  Basically need to have a rail that allows a bolt head to slide on any of the 4 sides so that I can make a box/table structure.

 

 




Best Regards,
Jeremy Coxon NABCEP # 091308-21
MWBE Certified




 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210827/d7d8a1a9/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 234510 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210827/d7d8a1a9/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 13108 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210827/d7d8a1a9/attachment-0001.jpg>