[RE-wrenches] Charging a 108V battery bank
larry at starlightsolar.com
larry at starlightsolar.com
Thu Jul 1 17:18:06 EDT 2021
Just thought I would throw out that with an Elite Power Solutions Li-ion battery system you can connect a PV solar source directly to the battery, no PV controller needed. The EMS will monitor each cell and open the charge relay when the battery is full. The dual solenoid controller will allow loads to operate uninterrupted.
Use a DC down converter to share power to the 48V battery or loads.
Larry Crutcher
Starlight Solar Power Systems
On Jun 30, 2021, at 1:50 PM, Dave Tedeyan <dave at sungineersolar.com> wrote:
Hi All,
I am going to be working with someone who plans to completely electrify a boat. The electric motor is meant to run on nine 12V batteries, or 108V. The motor manufacturer recommends a charger that can run on 120V or 240V. But has anyone seen a charger that can take solar power and directly charge a battery bank of 108V? The alternative that I see here is to have two separate battery banks, one for the motor, and one for house loads. Then we would have the solar charge a 48V battery bank, and then use an inverter to charge the 108V battery bank. It seems inefficient, although that may be the only choice.
A separate but related question: what is special about a marine inverter? If there is a 5kw charger for the battery bank, we will need a large inverter to handle this plus other AC loads, and I am not sure if there are "marine" inverters this large. And so other than concerns about getting wet, is there harm to putting a Radian, or a Sol-Ark on a boat?
Cheers,
Dave
--
<https://www.sungineersolar.com/>
Dave Tedeyan, P.E.
Owner | Sungineer Solar
p: he | him | his
a: 1653 Slaterville Rd. | Ithaca, NY 14850
w: www.sungineersolar.com <http://www.sungineersolar.com/>
c: (607) 288-2898
<Elco EP-70 datasheet.pdf>_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches at lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210701/bd64c73b/attachment.htm>
More information about the RE-Wrenches
mailing list