[RE-wrenches] grundfos SQFlex question

[Jay]

It’s too bad that Lorentz has come and gone a few times. 

I do like the architecture with the electronics all at the surface. And that the old ones had a easy manual speed control. 

The property has a sqflex in another well so I’ll just work on some options to get the flow as close as I can for
The customer. 

Thanks everyone for all the advice and info

Jay

> On Jun 16, 2021, at 4:51 AM, John Blittersdorf <john.blittersdorf at gmail.com> wrote:
> 
> 
> Jay,
>    Lorentz still has two people in texas. I can’t find an active dealer but they do provide excellent tech support 24/7.  I have to buy from a dealer but the ones that I have called only get one if specified on a new well they are drilling. They didn’t know much about them.
> 
> John B
> 
>> On Tue, Jun 15, 2021 at 5:34 PM jay <jay.peltz at gmail.com> wrote:
>> Does anyone have or know where I can get the pump curves with voltages?
>> 
>> I’m trying to limit flow by lowering the voltage, which I know works, but I can’t find the output vs voltage charts.
>> 
>> And does anyone know if Lorentz is still active in the USA?  
>> The last time i checked their controller had the ability for flow/speed adjustment.
>> 
>> Thanks
>> 
>> jay
>> 
>> peltz power
>> 
>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> Pay optional member dues here: http://re-wrenches.org
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> There are two list archives for searching. When one doesn't work, try the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210616/6d53fa54/attachment.htm>