[RE-wrenches] J Box adhesive failure.
Dan Fink
danbob88 at gmail.com
Sun Jun 13 09:56:00 EDT 2021
John; Have you tried a UV-setting cyanoacrylate? There are some available
that cure into a pliable but very strong (and thick) clear layer. If you
just have one J-box to do, a tube of "UV Wader Repair" from your local
flyfishing shop might do the trick. It cures quickly in direct sunlight, or
with a small UV flashlight.
Dan Fink
Owner, Buckville Energy Consulting LLC
IREC Certified Instructor for PV and Small Wind Installation
NABCEP Certified PV System Inspector
NABCEP PV Associate
d <dan.fink at greendustrialtraining.com>anbob88 at gmail.com
970-672-4342
On Sun, Jun 13, 2021 at 7:45 AM John Blittersdorf <
john.blittersdorf at gmail.com> wrote:
> I have a customer with two TOP racks of 8 Astropower 140’s and one panel
> has a j box that separated from the backing sheet but the wires are still
> connected. I’ve tried several adhesives but they eventually give up. The
> house was just sold and an inspector is coming To check out the house.
> Owner is sure that this loose box will be found by the inspector and jinx
> the sale. Anybody know of a super adhesive that will hold up?
>
> John Blittersdorf
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210613/823dd625/attachment.htm>
More information about the RE-Wrenches
mailing list