[RE-wrenches] Magnum MM1524AE rebuild?

drake.chamberlin at redwoodalliance.org drake.chamberlin at redwoodalliance.org
Fri Jun 11 15:27:09 EDT 2021


Hello Jeff, 

That sounds really useful. How do you wire this? Where do you get the
momentary switch? 

Thanks, 

Drake

---

On 2021-06-09 12:13, Jeff Clearwater wrote:

> Hey Dave and Wrenches,
> 
> This is why now I always install a pre-charge circuit for Magnum's and other inverters - especially on a Lithium pack with a BMS.  A momentary on-off switch and 50 watt 20 ohm resistor - $20 worth of parts = a lifetime of less stress on main breaker - inverter caps and battery BMS.  I recommend it for any inverter over 2 KW.  Many LiFePO4 BMS's will shut down when sensing that much inrush so it's a must on many systems.
> 
> Best,
> 
> Jeff Clearwater
> Village Power Design
> 
> palumbo131m at gmail.com 
> June 8, 2021 at 6:01 AM

>> Is a Magnum MM1524AE inverter/charger repairable and if so by whom? 
>> 
>> It failed after being reconnected to a battery bank, the typical small spark at the battery terminal when being reconnected was accompanied by a popping sound in the Magnum. Killed the Magnum. 
>> 
>> Dave Palumbo 
>> 
>> Hyde Park, VT 
>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> Pay optional member dues here: http://re-wrenches.org
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> There are two list archives for searching. When one doesn't work, try the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210611/a2f3af07/attachment.htm>


More information about the RE-Wrenches mailing list