[RE-wrenches] SW4024

[Lloyd Hoffstatter]

Steve,

I think this is what you’re looking for.

Best regards,

Lloyd Hoffstatter
Sunstruck Consulting


Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Steve Romo<mailto:steve at mountainpowersolutions.com>
Sent: Wednesday, April 14, 2021 7:23 AM
To: RE-wrenches<mailto:RE-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] SW4024

Hello Wrenches,
I have a customer with a very old (1995) Xantrex SW4024. He is trying to connect the two wire start to his generator. This unit has two sets of terminal blocks instead of the relay spade connectors I'm used to. Does anyone know or have an old manual that shows which ones to use? I know if I was on site I could just use my meter and figure it out, but it's a 3 hour drive.

Thanks in advance for your help

--
Steve Romo
Mountain Power Solutions LLC
NABCEP certified PV Installer #110112-124
Kohler Certified Generator Technician
Generac Certified Generator Technician

970-433-6316<tel:970-433-6316>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210414/5d63719c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SW4024 connections.pdf
Type: application/pdf
Size: 363930 bytes
Desc: SW4024 connections.pdf
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210414/5d63719c/attachment.pdf>