[RE-wrenches] Charging 48V Battery with One Module
Kent Osterberg
kent at coveoregon.com
Mon Apr 12 14:22:50 EDT 2021
Jason,
Would a 96 cell Panasonic module fit in the space you have available? It
would give you sufficient voltage to charge this battery.
Kent Osterberg
Blue Mountain Solar
On 4/12/2021 10:40 AM, Jason Szumlanski wrote:
> I want to charge a 51.2V LiPO battery with a single 420W 72-cell
> module. Vmp is 40.14V.
>
> It's one of those situations where I just need a lot of battery
> capacity as a backup for a specified time period, but it doesn't
> matter how long it takes to charge it back up. And I have space for
> exactly one 72-cell module.
>
> It's going to be a Victron inverter. I'm not sure if they make a DC-DC
> solution for this charging scenario or if there is another way to
> accomplish it without too much cost and complexity. I was
> half-heartedly thinking about an AC coupled microinverter, but that
> has drawbacks in terms of efficiency I think. Maybe that's not any
> worse than DC-DC conversion - I'm not sure. AC Coupling would probably
> be cheaper and easier. Monitoring might be difficult/limited. And AC
> coupling would require that the inverter be on (inverting) which isn't
> ideal for this situation either.
>
> Thanks in advance,
>
> Jason Szumlanski
> Florida Solar Design Group
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210412/9ff58f43/attachment.htm>
More information about the RE-Wrenches
mailing list