[RE-wrenches] Outback_Inverter firmware mismatch

[Wayne Irwin]

Wrenches and Lones,

We have had chronic inverter firmware mismatch issues with FLEXpower TWO FXR series on many systems.
We've updated the firmware and replaced mates, yet the system failures continue.

The systems will work flawlessly for months and then randomly show error and the firmware mismatch. Occasionally the system will discover (on its own) that the firmware is the same and turn back on. But usually, the "solution" is to unplug the mate and plug it back in and like magic...everything works again anywhere from 3 months to a year.

This is disappointing and frustrating to the system owners as well as costly and time consuming for us.

Any guidance in resolving this issue would be greatly appreciated.

All these systems have been assembled by Outback.
None of them have OpticsRE.



Wayne Irwin
President
License #CVC56695
State Licensed Solar Contractor
Pure Energy Solar International Inc.
Wayne at PureEnergySolar.com
PureEnergySolar.com<http://pureenergysolar.com/>
SolarChargingStation.com<http://solarchargingstation.com/>
352 377-6527 Office
352 336-3299 Fax
352 316-1637 Cell

The Sun Is Always Shining!

The content of this message is Pure Energy Solar Confidential. If you are not the intended recipient and have received this message in error, any use or distribution is prohibited. Please notify me immediately by reply e-mail and delete this message from your computer system. Thank you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210328/b25c6137/attachment.htm>