[RE-wrenches] Deep well pumping

[Kevin Pegg]

I use some older software from Grundfos called WinCAPS v 7.8 for pump sizing. It works well. I am only focused on the SQFlex systems, so have not used the other modules but believe it will do the calculations you wish. You may be able to find that software online to download. If not, I could try and locate the original installation CD or run the sizing for you. 

Kevin Pegg
EA Energy Alternatives Ltd. 
37471 Hwy 16 E
Telkwa, BC  V0J 2X2
250-846-9888
Http://www.EnergyAlternatives.ca 




-----Original Message-----
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of frenergy
Sent: March-26-21 12:39 PM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] Deep well pumping

Hey Folks,

             Why am I having such a difficult time finding a Grundfos distributor that can help me with a pump design for a new well?  Their website seems clunky for getting info  Static at 25 feet, drilled to 340 feet to hit 30+ GPM.  We would like to have 25 GPM at 40 psi, pump set at 300 ft, dynamic water level is 175 feet.  Does Grundfos have a pump for this application?

Thanks

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org