[RE-wrenches] Outback settings adjustment so batteries consume less of PV output

[frenergy]

Dave,

             I just went through a thorough installation/programming 
regime for an Outback FlexPower2 married to 8, SimpliPhi 3.8's.  Outback 
and SimpliPhi have spent a great deal of time developing setpoints for 
several of OB's products in a 23 detailed page integration guide.

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net

On 3/21/2021 8:53 AM, Dave Angelini Offgrid Solar wrote:
>
> Something is wrong with your programming of the monitor! Does the 
> battery make give you parameters to program, they should! This is not 
> normal with what I have seen.  Reading state of charge on a monitor 
> that does not have a BMS feeding Soc to it, is for indication only. It 
> is a moveable feast and a PITA!  I do not know why Outback has chosen 
> to not partner with battery companies and close the loop for LFP like 
> Schneider has? Anyone know why they will not do this?
>
> Lightning/gensets, and grid power can damage electronics and even 
> though they may still seem to be working, they are damaged.
>
> Probably best to start logging in case there is something deeper!  
> Good Luck!
>
>
>   
> *Dave Angelini Offgrid Solar "we go where powerlines don't" 
> http://members.sti.net/offgridsolar/ 
> <http://members.sti.net/offgridsolar/> e-mail offgridsolar at sti.net 
> <mailto:offgridsolar at sti.net> text 209 813 0060*
>


-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210321/ddc787da/attachment.htm>