[RE-wrenches] GVFX3524 fan replacement

[toddcory at finestplanet.com]

has anyone successfully done this without removing the inverter from the wall?

todd
 
 


On Sunday, February 14, 2021 6:26pm, "Foxfire Energy" <dan at foxfire-energy.com> said:


Fan replacement is easier than boards 


Sent from my iPhone

On Feb 14, 2021, at 9:00 PM, John Blittersdorf <john.blittersdorf at gmail.com> wrote:



Hi Ron,
    Yes it is field repairable. Just open up the inverter and the fan is in that outer housing.  When lifting the case up, remember the fan power wire needs by be unplugged as you lift the case as not to rip it off the circuit board it is attached to.  Then you will just turn the case over and remove the fan and replace with the new one.  Then carefully plug it back in before completing the replacement of the case.  
If you haven’t opened one up before, the red and black round plastic spacers on the dc terminals are screwed off, the six small Phillips head screws removed from the exposed AC board, and the 8 screws holding the case to the inverter base removed and lift the case up part way until you can see the fan wire. 
John Blittersdorf 
CV Wind Service 



On Sun, Feb 14, 2021 at 8:15 PM Ron Young <[ solareagle at solareagle.com ]( mailto:solareagle at solareagle.com )> wrote:Hi Wrenches, I have a client with an Outback GVFX3524 inverter that has had a fan failure. I will check with Outback but thought I might get a head start here. Is this a field replaceable item? I know the boards are but not sure about the fan. Any info much appreciated, thanks.

 Ron

 _______________________________________________
 List sponsored by Redwood Alliance

 List Address: [  RE-wrenches at lists.re-wrenches.org ]( mailto:RE-wrenches at lists.re-wrenches.org )

 Change listserver email address & settings:
[ http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org ]( http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org )

 There are two list archives for searching. When one doesn't work, try the other:
[ https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ ]( https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ )
[ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org ]( http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org )

 List rules & etiquette:
[ http://www.re-wrenches.org/etiquette.htm ]( http://www.re-wrenches.org/etiquette.htm )

 Check out or update participant bios:
[ http://www.members.re-wrenches.org ]( http://www.members.re-wrenches.org )

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org




Sent from Finest Planet WebMail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210214/4e037aaa/attachment.htm>