[RE-wrenches] Raceway Partitions or Barrier in Gutters
August Goers
august at luminalt.com
Mon Feb 1 19:44:36 EST 2021
Hi Mac,
We use wireway "gutters" all the time. Our supplier mostly sends us Hoffman
brand wireways and they also sell a barrier kit:
Here is an example of a barrier and a 4"x4"x24" wireway, you'd need to spec
out the dimensions you need for your project:
https://hoffman.nvent.com/en-us/products/barrier-kit-bolt/encf44bk60
https://hoffman.nvent.com/en-us/products/straight-section-lay-flat-cover-type-1/encf44t124gvp
August
Luminalt
On Mon, Feb 1, 2021 at 4:12 PM Dave Angelini Offgrid Solar <
offgridsolar at sti.net> wrote:
> Not a day for me.
>
> I do not care if it is UL listed or not. The Schneider PDP is UL also. Not
> high reliability in my opinion! Especially at 600vdc as there is not disco
> that will fit in the load center or PDP that I would trust. We all have our
> requirements and they can easily exceed UL !
>
>
>
> *Dave Angelini Offgrid Solar
> "we go where powerlines don't"
> http://members.sti.net/offgridsolar/ <http://members.sti.net/offgridsolar/>
> e-mail offgridsolar at sti.net <offgridsolar at sti.net>
> text 209 813 0060*
>
> On Mon, 1 Feb 2021 19:06:10 -0500, Ray <ray at solarray.com> wrote:
>
> On both Outback and Midnites's AC/DC Load centers, they just have separate
> areas, but there is no partition, or anything like that. They are UL
> listed. I don't do GT, so I don't really deal with this issue outside of
> the E panel, but if it were me, I'd just zip tie the PV wires together, put
> labeling on them so that it was clear they were PV conductors, and call it
> a day.
>
> Ray Walters
> Remote Solar
> 303 505-8760
>
> On 2/1/21 6:55 PM, Dave Angelini Offgrid Solar wrote:
>
> I land 600vdc PV into the Mppt/Mppt's only. I never mix 600vdc with
> anything except SPD/disco ever!
>
> Just not that hard and for offgrid, standard practice for reliability.
> Same with 150vdc, I never get it into the PDP and disco it up stream form
> mppt.
>
>
>
> *Dave Angelini Offgrid Solar
> "we go where powerlines don't"
> http://members.sti.net/offgridsolar/ <http://members.sti.net/offgridsolar/>
> e-mail offgridsolar at sti.net <offgridsolar at sti.net>
> text 209 813 0060*
>
> On Mon, 1 Feb 2021 15:37:34 -0700, Mac Lewis <maclewis1 at gmail.com>
> <maclewis1 at gmail.com> wrote:
>
> Hello wrenches,
>
> What are folks using for raceway partitions to comply with 690.31(B) when
> running AC/DC and batteries conductors through a common gutter? Is there a
> product or just something made by the installer? These multiport inverters
> make it difficult not to use a gutter and have a clean installation.
>
> Thanks!
>
> --
>
>
>
> Mac Lewis
>
> "Yo solo sé que no sé nada." -Sócrates
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:http://www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210201/f6bf7781/attachment.htm>
More information about the RE-Wrenches
mailing list