[RE-wrenches] SMA Load Shedding Contactor 100A, 2P

[Mac Lewis]

Hi Jason,

I have done this with mercury displacement relays:
https://www.mdius.com/mercury-relays/two-pole-relays-contactors/two-pole-100-amp

They do have a 100A 2P 48V coil relay.  They seem to work perfectly.

Good luck

On Tue, Jan 19, 2021 at 2:51 PM Jason Szumlanski <
jason at floridasolardesigngroup.com> wrote:

> Does anyone know where I can get a load shedding contactor described in
> SMA documentation for use with a multi-function relay in a Sunny Island?
>
> Thanks,
>
> Jason Szumlanski
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>

-- 



Mac Lewis

*"Yo solo sé que no sé nada." -Sócrates*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210119/9d976974/attachment.htm>