[RE-wrenches] Radian Charges 1 hour per calendar day

frenergy frenergy at psln.com
Fri Jan 8 23:58:15 EST 2021


The only thing I would add to William's list of things to do to solve 
this issue is that there is a proper sequence in shutting down and 
rebooting the inverter, found in Outback  docs.  There is also firmware 
for the HUB but not sure if that would help or is necessary in this 
situation.

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net

On 1/8/2021 11:54 AM, William Miller wrote:
>
> Drake:
>
> I would suggest the following course of action:
>
> 1.Reboot Mate
>
> 2.Reboot inverter
>
> 3.Reset all equipment to factory defaults and manually reprogram each item
>
> 4.Update Mate Firmware
>
> 5.Update Inverter Firmware.
>
> We have solved mystery Radian problems with a firmware update.
>
> Good luck!
>
> William Miller
>
> Miller Solar
>
> 17395 Oak Road, Atascadero, CA 93422
>
> 805-438-5600
>
> www.millersolar.com <http://www.millersolar.com>
>
> CA Lic. 773985
>
> -----Original Message-----
> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org 
> <mailto:re-wrenches-bounces at lists.re-wrenches.org>] On Behalf Of 
> drake.chamberlin at redwoodalliance.org 
> <mailto:drake.chamberlin at redwoodalliance.org>
> Sent: Friday, January 8, 2021 10:34 AM
> To: RE-wrenches at lists.re-wrenches.org 
> <mailto:RE-wrenches at lists.re-wrenches.org>
> Subject: [RE-wrenches] Radian Charges 1 hour per calendar day
>
> Hello Wrenches,
>
> An off grid, Radian / Mate 3 system we set up some years back has worked
>
> flawlessly. The client is now reporting that his system will only go
>
> into absorption charge for 1 hour per calendar day. The setting was
>
> previously to absorb for 2 hours.
>
> He has tried shutting off the generator and then restarting. The
>
> inverter will connect, but not go into absorb.
>
> During this cloudy period, he is only able to get the batteries to about
>
> 80 percent before he needs to leave the site for a week or so.
>
> I finally go through to Outback, and they think it is a Firmware
>
> problem. As it is a long drive out, it seems worth while to run it by
>
> the list. Does FW this seem like the issue?
>
> Thank you,
>
> Drake
>
>
-- 



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210108/f7cceb66/attachment.htm>


More information about the RE-Wrenches mailing list