[RE-wrenches] DPW rack adjustment

[Jay]

Hi Jeremy,

I’ve not run into that issue but you could put more bolts at different locations for different tilts. 

A template would keep them the correct spacing. 

Wouldn’t slide but would be adjustable. 

I don’t know if you’ve tried heat but it’s pretty amazing at getting things loosened up. 
The other way is cold, using a spray can for computers for example. 
Or using the combo. 

Damn it’s just a stupid rack, should be easy. 

Jay

Peltz power. 



> On Oct 15, 2020, at 7:52 AM, Jeremy Rodriguez <allsolarjeremy at msn.com> wrote:
> 
>  Does anyone have any trick to adjusting the tilt angle of the TPM4 pole mounts?  These are the racks with the aluminum beam (strongback) with slots for the bolts. 
> We have tried anti seize, and cutting the heads of the bolts square in attempts to help with adjustment. 
> Help!
> 
> 
> Jeremy Rodriguez 
> Solar Installation / Design Expert 
> All Solar, Inc.
> 1463 M St
> Penrose Colorado 81240
> 
> Sent by Jeremy's iPhone. Sorry for typos and shorthand. 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201015/54ada8e2/attachment.htm>