[RE-wrenches] Enphase Raw Q Cable

[Jay]

Hi Jason. 

I just reviewed the assembly document and it does list in the notes wire specifications. It does not say only for emphase wire. 

If your wire meets those specs I think your good to go. 

Jay

Peltz power. 

> On Oct 10, 2020, at 7:29 AM, Jason Szumlanski <jason at floridasolardesigngroup.com> wrote:
> 
> 
> But is this compatible with Enphase field wireables?
> 
> I know Enphase type DG cable is built on the TC-ER specs, but would it be a listing violation to use TC-ER with the connectors?
> 
> 
> 
>> On Thu, Oct 8, 2020 at 2:55 PM Bryan Norkunas <Bryan at pv-cables.com> wrote:
>> TC-ER is the way to go, easily found in stock all over the country and much less in cost than the Q-Cable
>> 
>>  
>> 
>>  
>> 
>> Bryan Norkunas
>> 
>> PV-Cables Inc.
>> 
>> 989 Milton Ave Ste 1D
>> 
>> Ferndale CA 95536
>> 
>> (707) 923-3000 office
>> 
>> www.pv-cables.com
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jason Szumlanski
>> Sent: Thursday, October 8, 2020 2:50 AM
>> To: RE-wrenches
>> Subject: Re: [RE-wrenches] Enphase Raw Q Cable
>> 
>>  
>> 
>> I was thinking TC-ER. I would need a quick, easy, low cost way to transition from the Q Cable to the TC-ER. I'm pretty sure the Enphase field wireable connectors are not compatible with TC-ER, but I could be wrong. 
>> 
>>  
>> 
>>  
>> 
>> On Wed, Oct 7, 2020, 6:37 PM Bryan Norkunas <Bryan at pv-cables.com> wrote:
>> 
>> 12/2 flat tray cable?
>> 
>>  
>> 
>> Bryan Norkunas
>> 
>> PV-Cables Inc.
>> 
>> 989 Milton Ave Ste 1D
>> 
>> Ferndale CA 95536
>> 
>> (707) 923-3000 office
>> 
>> www.pv-cables.com
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of William Miller
>> Sent: Wednesday, October 7, 2020 9:42 AM
>> To: RE-wrenches
>> Subject: Re: [RE-wrenches] Enphase Raw Q Cable
>> 
>>  
>> 
>> Put your junction boxes closer to the microinverters?
>> 
>>  
>> 
>> Miller Solar
>> 
>> 17395 Oak Road, Atascadero, CA 93422
>> 
>> 805-438-5600
>> 
>> www.millersolar.com
>> 
>> CA Lic. 773985
>> 
>>  
>> 
>>  
>> 
>> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jason Szumlanski
>> Sent: Tuesday, October 6, 2020 9:08 AM
>> To: RE-wrenches
>> Subject: [RE-wrenches] Enphase Raw Q Cable
>> 
>>  
>> 
>> Has anybody come up with a good wiring alternative to Raw Q Cable when making long runs along rails from a string to a junction box? 
>> 
>>  
>> 
>> We are running into supply problems through distribution. I'm looking for something that might be more readily available.
>> 
>>  
>> 
>> Jason Szumlanski
>> 
>> Florida Solar Design Group
>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> There are two list archives for searching. When one doesn't work, try the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> There are two list archives for searching. When one doesn't work, try the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201010/0dd75f6f/attachment.htm>