[RE-wrenches] Pump power

[frenergy]

Wrenchers,

             We're upgrading an off-grid water system.  Dynamic head 
while pumping at 20 GPM is 150 ft from water level to wellhead and then 
its 85 ft vertical to storage tank so 235 ft total head to open 
discharge.  We would like to get most of that 20 GPM, we need to know if 
there is personal experience with starting a 1.5 or 2 HP, 240 vac, 2 
wire submersible pump against that kind of head with an Outback Flex 
Power2 (2 X VFXR3648A-01 inverters).

             The FP2 will also be powering standard off-grid loads.  
There is plenty of battery behind the inverters.  If a soft-start 
solution is required, some specifics would be great. Grundfos doesn't 
seem to have an option for these requirements, solar-direct is not an 
option at this location.

Thanks,

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net


-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus