[RE-wrenches] Microgrid... Outback or SMA or other?
penobscotsolar at midmaine.com
penobscotsolar at midmaine.com
Wed Sep 9 13:37:36 EDT 2020
What do you see, Dave? We have 6 12 kW and two 8 kW installed so far in
the Bahamas and two here in Maine, all with Fortress batteries, and I
cannot be more pleased. I do wish they had a remote monitor panel for
easier at home monitoring and I guess I would rather they had their own
monitoring system instead of Powerview, but compared to others I am
thrilled at the ease of installation and programming, zero service calls
and wireless connectivity for monitoring over the internet.
Thanks,
Daryl
>
>
> Due diligence on Sol Arc. I would look at them harder if I were you!
>
>
> Dave Angelini Offgrid Solar
> "we go where powerlines
> don't"
> http://members.sti.net/offgridsolar/ [1]
> e-mail offgridsolar at sti.net
> [2]
> text 209 813 0060
>
> On Wed, 9 Sep 2020 15:32:51 +0000, Kienan Maxfield
> wrote: Thank you all so much for the suggestions!! I hadn't thought of
> SolArk, but I'll have to include that in my proposals. It sounds like
> they've really gathered quite a following. Thanks, Kienan
> MAXFIELD
> SOLAR MAXFIELDSOLAR at HOTMAIL.COM [3] (801) 631-5584 (CELL)
>
> -------------------------
> FROM: RE-wrenches on behalf of Jay
> SENT:
> Tuesday, September 8, 2020 8:50 PM
> TO: RE-wrenches
> SUBJECT: Re:
> [RE-wrenches] Microgrid... Outback or SMA or other? Hi Joe A
> correction Both the 8 and 12kw are 9 kw inverters In off grid mode
> according to the specs. For grid selling the 12kw is 12 kw. Jay
> Peltz
> power
> On Sep 8, 2020, at 7:45 PM, MiJo Nels wrote:
> we've found
> SolArk to be SOLID!! .. And yes 8 inv yield about 96kW, with a TON of
> surge
> capabilities..
> Joe Nelson
> Project Manager C-46/C-10 Sustainable
> Energy Group Inc., A California Corporation
> CSL# 868816
> www.SustainableEnergyGroup.com [4] 530-273-4422 (Office)
> 530-217-8385
> (Cell)
> 
>    
>
> -------------------------
> FROM: RE-wrenches on
> behalf of pgiroux at mindspring.com
> SENT: Tuesday, September 8, 2020 1:24:03
> PM
> TO: 'RE-wrenches'
> SUBJECT: Re: [RE-wrenches] Microgrid... Outback or
> SMA or other?
>
> I also suggest the Sol-Ark 12's. Extremely efficient,
> simple to program, does a wonderful job in either ac coupling, stand alone
> or pure off grid and terrific customer support.
>
> Peter Giroux
>
> ASAE
>
>
> FROM: RE-wrenches ON BEHALF OF Bryan Norkunas
> SENT: Tuesday, September
> 8, 2020 1:50 PM
> TO: 'RE-wrenches'
> SUBJECT: Re: [RE-wrenches]
> Microgrid... Outback or SMA or other?
>
> Sol-Arks would be possible, you
> can link 8 inverters.
>
> BRYAN
>
> PV-CABLES
>
> FROM: RE-wrenches
> [mailto:re-wrenches-bounces at lists.re-wrenches.org [5]] ON BEHALF OF Chris
> Schaefer
> SENT: Tuesday, September 8, 2020 10:40 AM
> TO: RE-wrenches
>
> SUBJECT: Re: [RE-wrenches] Microgrid... Outback or SMA or other?
>
> I'd
> suggest giving the crew at Sol-Ark a quick call @ 972-575-8875 with their
> 12kw unit. Not sure what their max number of inverters are.
>
> Christopher
>
>
> On Tue, Sep 8, 2020 at 1:14 PM Kienan Maxfield wrote:
>
> Hey all,
> I'm designing a microgrid sized off-grid system for somebody, and I'm just
> wondering if anyone knows of any issues with the following designs...
>
>
> The client says he needs 70 kW. His load data looks pretty solid, so I'm
> sticking to using that number as a minimum, at least during the initial
> proposal stage. I only know of two possible equipment options for this
> size
> range...
>
> * I think I can use up to 10 Outback Radians, for up to an
> 80 kW system. Are there any bugs or problems with using this many
> inverters
> on one hub? I know I've read about issues with selling to the grid, but
> that's not an issue, this is off-grid.
> * I know that the SMA cluster box
> with sunny islands can allow for up to a 72 kW system. Do you know of any
> bugs or problems with this system?
>
> Are there any other options that anyone
> would suggest? Schneider's website says they can only do up to 61 kW, and
> Victron can only do up to 60 kW.
>
> I know that the Outback system would
> yield a 240/120 Split-Phase system and that the SMA would yield a 208/120
> 3Ø system, but this doesn't really matter either way for this job.
>
>
> Thanks so much,
>
> Kienan
>
> MAXFIELD SOLAR
>
>
> MAXFIELDSOLAR at HOTMAIL.COM [7]
>
> (801) 631-5584 (CELL)
>
>
> _______________________________________________
> List sponsored by
> Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org [8]
>
>
> Change listserver email address & settings:
>
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [9]
>
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [10]
>
>
> List rules ">Chris Schaefer's
>
> Tel/Fax 585-229-2083 or Cell 585-748-1870
>
> 5115 South Hill Road ~ Canandaigua New York 14424
> www.solarandwindfx.com
> [13] ~ E-mail: _chris at solarandwindfx.com [14]_
>
> Thomas Jefferson, the
> author of our great Constitution, once said, "democracy" will cease to
> exist when you take away from those who are willing to work and give to
> those who would not."
>
> [15]
> Virus-free. www.avg.com [16]
>
>
> _______________________________________________
> List sponsored by Redwood
> Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change
> listserver email address & settings:
>
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List
> rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update
> participant bios:
> www.members.re-wrenches.org
>
>
> Links:
> ------
> [1]
> http://members.sti.net/offgridsolar/
> [2] mailto:offgridsolar at sti.net
> [3]
> mailto:maxfieldsolar at hotmail.com
> [4]
> http://www.SustainableEnergyGroup.com
> [5]
> mailto:re-wrenches-bounces at lists.re-wrenches.org
> [6]
> mailto:maxfieldsolar at hotmail.com
> [7] mailto:maxfieldsolar at hotmail.com
> [8]
> mailto:RE-wrenches at lists.re-wrenches.org
> [9]
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> [10]
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> [11]
> http://www.re-wrenches.org/etiquette.htm
> [12]
> http://www.members.re-wrenches.org
> [13] http://www.solarandwindfx.com
> [14]
> mailto:chris at solarandwindfx.com
> [15]
> http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient
> [16]
> http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
More information about the RE-Wrenches
mailing list