[RE-wrenches] wire clips for Sunmodo rail

[Kirk Herander, VSE]

Thanks,
Unfortunately the HR300 rail which I'm using has no side channels, just 1/4" top and 3/8" bottom ones.

Kirk Herander / kirkh at vermont.solar [mailto:kirkh at vermont.solar]
Owner|Principal, VT Solar, LLC
Celebrating our 29th Anniversary 1991-2020
www.vermont.solar [https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636842843233477645&sdata=0NjyuKeQbEK6245SNnk8X4XnP9Q%2B%2BqtvcALkdDghvk4%3D&reserved=0]
dba Vermont Solar Engineering
802.863.1202

On 9/7/2020 12:55:30 PM, Kent Osterberg <kent at coveoregon.com> wrote:
Kirk,

For the HR150 rail, Sunmodo has a channel clip, part A20252-001 or A20252-BK1 (black), that will hold the wires in the channel on the side of the rail. I don't see it in their recent catalog, but I have purchased them recently.

For the heavier rails, which are probably being used on the ground mount, there is a cable clip designed to attach to the 3/8" bolt slot, part A20162-001, unfortunately it was sized for the older Enphase cable and isn't much use for anything else.

Stainless cable ties ...

Kent Osterberg Blue Mountain Solar 70177 Ponderosa Ln. Cove, OR 97824 www.bluemountainsolar.com [http://www.bluemountainsolar.com]

On 9/7/2020 5:44 AM, Kirk Herander, VSE wrote:

All,
I am installing a Sunmondo ground mount for for first time. They don't offer a wire clip to work on their rail. One which clips in the top channel and hangs off the side, that is. The top channel accommodates a 1/4-20 screw, but the rail is wider than any I've used before, thus i can't find a clip to span the channel to rail side and snap in.
Looked at Heyco and Hellermantyton lines but no luck. Any ideas?


Kirk Herander / kirkh at vermont.solar [mailto:kirkh at vermont.solar]
Owner|Principal, VT Solar, LLC
Celebrating our 29th Anniversary 1991-2020
www.vermont.solar [https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&amp;data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636842843233477645&amp;sdata=0NjyuKeQbEK6245SNnk8X4XnP9Q%2B%2BqtvcALkdDghvk4%3D&amp;reserved=0]
dba Vermont Solar Engineering
802.863.1202


_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches at lists.re-wrenches.org [mailto:RE-wrenches at lists.re-wrenches.org] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org] List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org] List rules & etiquette: www.re-wrenches.org/etiquette.htm [http://www.re-wrenches.org/etiquette.htm] Check out or update participant bios: www.members.re-wrenches.org [http://www.members.re-wrenches.org]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200907/cd9c2463/attachment.htm>