[RE-wrenches] Solar Edge optimizer attachment using EcoFoot 2 mounting

[Eric Smiley]

We have similar curiosity but using Tigo. We also would like to use APS QS1
micro-inverters and the MLPE mounts that Ecolibrium has don't really fit
the bill.

Eric Smiley, P.Eng.

Project Manager, North Island

E:  eric at vecoop.ca

T:  1-888-386-0116 ext 702 (toll free)

C:  250-703-6004

W:  viridianenergy.ca <http://www.viridianenergy.ca>

<http://www.viridianenergy.ca/>

RENEWABLE POWER NOW


On Mon, 31 Aug 2020 at 18:37, Carl Adams <cadams at sunrocksolar.com> wrote:

> I have a project requiring the Solar Edge optimizers (P370 or P860) on an
> Ecofoot 2 mounting system with 72 cell modules.  Curious as to what is
> being done to mount the  optimizers to either the module frame or the
> Ecofoot 2 base.  A picture could be worth a thousand words.
>
> With Kind Regards
> Carl Adams, President
> SunRock Solar, LLC
> 513.290.9072 (mobile)
> 513.766.6025 (office)
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200831/7ee6cbaf/attachment.htm>