[RE-wrenches] Modifying a plumbing vent

[Jerry Shafer]

I have relocated roof vents several times, just have to make sure they
comply, no P traps, flat or downward trends. Fasten correctly to the
rafters, sealing both old and new. If you want to do this on the roof under
the modules same rules apply.
Jerry

On Sat, Aug 29, 2020, 3:17 PM William Miller <william at millersolar.com>
wrote:

> Friends:
>
>
>
> Over all these years I have always been able to work around plumbing
> vents.  Now I find one that is just in the way.  My foreman suggests we 90
> it out of the way, and makes the point that there are vent 90s in the walls
> all the time.  Is there any concern about this practice?
>
>
>
> Thanks in advance.
>
>
>
> William
>
>
>
>
>
> Miller Solar
>
> 17395 Oak Road, Atascadero, CA 93422
>
> 805-438-5600
>
> www.millersolar.com
>
> CA Lic. 773985
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200829/a86ac461/attachment.htm>