[RE-wrenches] 200A Automatic Transfer switch

[Kirpal]

Hi Wrenches.
Can anyone recommend a good 200A Nema3 auto transfer switch that does not
need to have any generator feedback (ie. Generac version which requires
signal from generator) to transfer.  Basically looking for a dumb version
which transfers based on loss of grid voltage, and then reconnects based on
re supply of grid voltage.
The Gerearc version which was installed today relies on feedback from the
generator which senses loss of grid voltage to authorize the transfer
switch to toggle to back up mode. When the grid comes back the transfer
switch switches back to normal mode without feedback from the generator
voltage sense wires but not the other way around.

Thank you!

Sunny Regards,
Kirpal Khalsa
Oregon LRT#25
NABCEP Certified PV Installation Professional
Oregon Solarworks LLC
www.oregonsolarworks.com
541-299-0402
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200811/e1c7d478/attachment.htm>