[RE-wrenches] Flir One for Smart Phones (Jason Szumlanski)

[Ken Schaal]

On the past I've had plan reviewers object to any hole or lag into rafters,
especially trusses, claiming  it voided warranty...any thoughts?
Ken Schaal


On Tue, Aug 4, 2020, 5:45 PM Jeremy Coxon <jcoxon at sunwindpowerinc.com>
wrote:

> We have tried all manner of gadgets over the years and haven’t found
> anything more accurate than a hammer and a tuned (experienced) ear.  Gentle
> taps (so as to not damage roof) are all that’s needed.  We also have a 12”
> piece of solid #10 copper in each tool belt for those tricky roofs where
> rafter spacing isn’t consistent or there are sistered rafters for long
> spans.  Insert the wire thru a test hole, bend into a U shape, then rotate
> to find exact location of rafter, mark with chalk, then go to town.
>
> Jeremy Coxon NABCEP
> Certified MWBE
>
> Sent from my iPhone
>
> > On Aug 4, 2020, at 5:34 PM, re-wrenches-request at lists.re-wrenches.org
> wrote:
> >
> > Re: Flir One for Smart Phones (Jason Szumlanski)
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200804/49c1a9db/attachment.htm>