[RE-wrenches] Two Dilemmas

Dana Orzel dana at solarwork.com
Fri Jul 24 14:01:34 EDT 2020


Hups do come with a battery pulling tether or did come with one.

 

 

 

Dana Orzel                              Great Solar Works, Inc. 

C - 208.721.7003                       dana at solarwork.com

Idaho Contractor - # 028765         Idaho PV # 028374

NABCEP # 051112-136                        <http://www.solarwork.com/> www.solarwork.com

"Responsible Technologies for Responsible People since 1988"  

P Please consider the environment before printing this email.

 

 

From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of Rick Brown
Sent: Thursday, July 23, 2020 5:25 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Two Dilemmas

 

Allen,

 

Did you use the battery terminals to pull the cells? I don’t see any other way to grab the cells. 

 

Great idea on the engine hoist!

rick brown
SolShine Energy Alternatives, LLC
Electrical & Solar Contracting Services
www.SolShineEnergyAlternatives.com <http://www.SolShineEnergyAlternatives.com> 
Check, Virginia 24072
540.808.9502 <tel:540.808.9502> 

VA Class A Contractor Lic# 2705147660
VA Master Electrician Lic# 2710062762
VA Alternative Energy Systems Installer  
NABCEP Certified PV Installation Professional 110112-21





On Jul 23, 2020, at 7:03 PM, Allan Sindelar <allan at sindelarsolar.com <mailto:allan at sindelarsolar.com> > wrote:



Rick:

1) consider renting or buying an engine hoist to pull out the individual cells, and lowering each onto a hand truck for transport to your truck. I have done this several times - it’s actually not that difficult with a crew of two or three. 

Northwest Energy Storage (www.solarone <http://www.solarone>  com, I think) supplies a short, heavy nylon strap with clevises at each end for raising and lowering each cell. You might contact them to purchase one. 

At one remote site, the client suggested that I buy a cheap engine hoist from Harbor Freight, as it would be cheaper than renting a professional one. 

 

2) the older Trace SW series is early technology in regards to its sell efficiency,  because of the lack of what was dubbed ‘silent sell’. The general number from when it was about the only game in town was about 55%. I would suggest upgrading to a modern unit if it’s primarily used for selling back. 

 

Allan Sindelar, Sindelar Solar





On Jul 23, 2020, at 3:47 PM, Rick Brown <rick at solshineenergyalternatives.com <mailto:rick at solshineenergyalternatives.com> > wrote:

Wrenches,

 

Dilemma #1:

 

I’ve had to replace 4 sets of Solar One batteries (see pic). Each set weighs in excess of 1000lbs. How have you all transported these? The originals were placed into service prior to the room’s walls and roof going up. 

 

<image0.jpeg>

 

 

Dilemma #2:

 

The above system is comprised of a Trace SW5548 along with two Outback FM60s. After reprogramming the CCs and inverter with new charging parameters, I can’t get the Trace to export excess production once the batteries are charged. I do have the inverter set to “Sell” mode What am I missing? I have had little experience with the Trace line. 

 

Thanks,

rick brown
SolShine Energy Alternatives, LLC
Electrical & Solar Contracting Services
www.SolShineEnergyAlternatives.com <http://www.SolShineEnergyAlternatives.com> 
Check, Virginia 24072
540.808.9502 <tel:540.808.9502> 

VA Class A Contractor Lic# 2705147660
VA Master Electrician Lic# 2710062762
VA Alternative Energy Systems Installer  
NABCEP Certified PV Installation Professional 110112-21

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org> 

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 

Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org> 

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org> 

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 

Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200724/659175ca/attachment.htm>


More information about the RE-Wrenches mailing list