[RE-wrenches] protecting wire below 8' w/awning array

[Sindelar Solar]

I used Solarscrim to protect the underside module wiring of the array on 
one job. Good product and support and reasonably priced.

Allan

On 7/20/2020 11:16 AM, Sam Haraldson wrote:
> Much like Ray we have interpreted this protection to mean the 
> "dangerous" parts of the solar and not the module frame.  As such we 
> employed plastic "deer fence" Tek screwed to some racking components 
> in one array where the client wished for more tamper-resistance at the 
> point where the conductors were close to the ground.
>
> Another solution similar to this is employed by All Earth Renewables 
> for their ground mount arrays that employs a tasteful looking piece of 
> opaque coroplast.  It rests along the backside of the modules to keep 
> people's hands from touching conductors and looks a little cleaner 
> than a piece of mesh.
>
>
> 	
>
>
>
>
>
>
> 	
> 	
> 	
> 	
> 	
> 	
> 	
> 	
>
>
>
>
> 	
> 	
>
-- 

*Allan Sindelar*
allan at sindelarsolar.com <mailto:allan at sindelarsolar.com>
NABCEP Certified PV Installation Professional
New Mexico EE98J Journeyman Electrician
Founder (Retired), Positive Energy, Inc.
*505 780-2738 cell*

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200720/793fac16/attachment.htm>