[RE-wrenches] Tesla Powerwall 2.0 - Experience?
Jerry Shafer
jerrysgarage01 at gmail.com
Sun Jul 19 12:54:26 EDT 2020
Hilton, Wrenches
As I recall Tesla does not recommend their battery for off grid
applications, they need to be connected to the internet and without that
there may be warranty issues. I don't think that the off grid world and
daily cycling would work well over time either. How would you jump start
the power wall if it died do to low voltage cut out, a genny might work if
it connects and stays connected this might also affect the warranty.
Jerry
NABCEP PV inspector
On Sun, Jul 19, 2020 at 9:02 AM Hilton Dier III <hiltondier at gmail.com>
wrote:
> Greetings, Wrenches,
>
> I have an off-grid client who has been reading the buzz about the Tesla
> Powerwall 2.0. I have been reading the data sheets and manual for it and it
> appears to be AC coupled only. There was talk of a DC input version, but
> apparently that fell by the wayside. I try to be agnostic about technology,
> and I'd be willing to subcontract a Tesla-approved installer if, in fact,
> this was the best solution.
>
> Does anybody have experience using the Powerwall 2.0 in an off grid PV
> system? Is it AC coupled only? Can it take generator power without barfing?
> What is the lead time on these?
>
> Many Thanks,
>
> Hilton
>
> --
> Hilton Dier III
> Missisquoi River Hydro
> Renewable Energy Design
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200719/5add5c6c/attachment.htm>
More information about the RE-Wrenches
mailing list