[RE-wrenches] protecting wire below 8'

Glenn Burt glenn.burt at glbcc.com
Sat Jul 18 10:53:24 EDT 2020


The discussion about an 8 ft rule is in regards to accessibility, not physical damage. 

Two completely independent topics…

 

Glenn

 

From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of August Goers
Sent: Friday, July 17, 2020 10:32 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] protecting wire below 8'

 

Hi Kirk - We work in San Francisco where they have a local code amendment: <https://codelibrary.amlegal.com/codes/san_francisco/latest/sf_building/0-0-0-84935> 

 

300.4(I)  Add the following section:  

 (I)   Subject to Physical Damage. Premises wiring systems installed less than 2.44 m (8 feet) above a walking surface or finished floor are considered subject to physical damage.

 

As far as I'm aware otherwise, there is not a specific definition specifying 8' for physical damage in the broader NEC - I think it's just up to the AHJ.

 

August

Luminalt

 

 

 

On Fri, Jul 17, 2020 at 8:38 AM Kirk Herander <vtsolar at icloud.com <mailto:vtsolar at icloud.com> > wrote:

All,

Is there a reference to this so-called "8-foot rule" that someone could point me to in the NEC? Thanks.

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org> 

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 

Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200718/0aab31ee/attachment.htm>


More information about the RE-Wrenches mailing list