[RE-wrenches] Oversized meter enclosure for line side connection recommendation

[Kristopher Schmid]

If you are going to replace the meter socket, using a 200 amp Milbank and a
set of Milbank Step Lugs
https://www.milbankworks.com/products/catalog/K4977-INT
makes a nice clean solution.

On Thu, Jun 18, 2020, 7:58 AM Christopher Warfel <
cwarfel at entech-engineering.com> wrote:

> Hello Wrenches. Does anyone have a recommendation for an oversized
> utility meter enclosure that would provide sufficient space for a line
> side tap?  It would be 6AWG from the PV system tapping into 2AWG Service
> Entrance Conductors.  Thank you for any recommendations.  Chris
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200618/2886041c/attachment.htm>