[RE-wrenches] Magnum Frequency Shift
Mark Frye
markf at berkeleysolar.com
Fri Jun 12 22:09:15 EDT 2020
I see.
What you say about the frequency shift being slow makes me again doubt
the value of even using it in my application.
I have a controller that can regulate the AC dump load. That same
controller has a high limit switch which I could use to cut the AC feed
to the GT inverters. But then both functions are in the same device. On
the other hand, it is a very reliable device so....perhaps sufficient.
On 6/12/2020 6:37 PM, Bradley Bassett wrote:
> I have a relay on the XW+ Aux and also frequency shift which is
> usually slower, so the relay usually cuts out first. I also have a DC
> coupled array feeding the system.
>
> Brad
>
> On Fri, Jun 12, 2020 at 4:34 PM Mark Frye <markf at berkeleysolar.com
> <mailto:markf at berkeleysolar.com>> wrote:
>
> Yes an elite group within an elite group.
>
> So the SB240 does not have frequency shift /wattage control. How
> are you implementing charge control in stand alone mode?
>
> On 6/12/2020 4:28 PM, Bradley Bassett wrote:
>> Wow! Someone else with SMA SB240's, I have 12 of them that I've
>> AC coupled to an XW+5548. They are very solid performers.
>>
>> Brad
>> AEE Solar
>>
>> On Fri, Jun 12, 2020 at 3:39 PM Mark Frye
>> <markf at berkeleysolar.com <mailto:markf at berkeleysolar.com>> wrote:
>>
>> Hello,
>>
>> I have a small array of 8 - SMA SB240 microinverters on the
>> roof. Peak
>> power out of the array has never exceeded 1800 W.
>>
>> I am adding a Magnum MS-PAE 4448 with a 315 AH flooded Lead
>> Calcium
>> battery bank.
>>
>> Cheers
>>
>> On 6/12/2020 12:31 PM, Chris Schaefer wrote:
>> > G'Day Mark,
>> >
>> > Which grid tied inverter are you attempting to AC couple
>> with. I
>> > apologize if you already called it out in the thread.
>> >
>> > Christopher
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>> <mailto:RE-wrenches at lists.re-wrenches.org>
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> <http://www.re-wrenches.org/etiquette.htm>
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address:RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org>
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
> <mailto:RE-wrenches at lists.re-wrenches.org>
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> <http://www.re-wrenches.org/etiquette.htm>
>
> Check out or update participant bios:
> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200612/d76ceb36/attachment.htm>
More information about the RE-Wrenches
mailing list