[RE-wrenches] Xantrex MPPT 80 600 Not Showing Up in SCP
Kirk Herander
vtsolar at icloud.com
Fri Apr 17 08:50:56 EDT 2020
So you terminate the shield somehow outside of the RJ45 connector?
On 4/16/2020 9:01:53 PM, Jeff Clearwater <jeffc at villagepowerdesign.com> wrote:
When I did my cable swap and reconfiguration that fixed it I also was more careful to route the xanbus cables away from the batter/inverter cables - thinking that perhaps induction was the culprit. As I have an rj45 crimp tool and some shielded CAT5e in the truck I think I'll just make up my own cables in the future after spending way more time than that troubleshooting.
Best of luck!
jc
Jason Szumlanski wrote on 4/16/20 3:00 PM:
I tried swapping the cables for the XW and MPPT. After reboot the XW continued to show up on the SCP but the MPPT did not. I didn't have another cable, but this suggests the cable is not the problem. I didn't think to change the order, however.
On Thu, Apr 16, 2020 at 5:57 PM Jeff Clearwater <jeffc at villagelab.net [mailto:jeffc at villagelab.net]> wrote:
Hey Jason,
I had a SCP xanbus system once that refused to show a component - The fix was replacing the cheap ethernet wires that schneider provided with better cables and/or changing the order of the components in the series comm string. not sure which did it as I did both changes at once but I do suspect those white cables.
Best,
Jeff
Jason Szumlanski wrote on 4/16/20 1:03 PM:
I am working with a client (not my install) with a XW6048 and MPPT 80 600 with a SCP. The SCP is not showing the MPPT in the setup menu. I am able to access the system settings and XW configuration, but not the MPPT settings. It is connected via Xanbus in this manner:
SCP -> MPPT -> XW
So the MPPT is in the middle and is passing through the XW signal just fine.
The MPPT also has a red error light illuminated, but it is charging the battery (positive current measured via clamp meter).
Any ideas?
Thanks,
Jason Szumlanski
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches at lists.re-wrenches.org [mailto:RE-wrenches at lists.re-wrenches.org] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [https://mailtrack.io/trace/link/b90ca785a525b3990337afa8e4de7b8f58299dda?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=a218969f1c881b8f] List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html [https://mailtrack.io/trace/link/782ab5370a2dc90df34131154f96595de5604ebc?url=http%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2Fmaillist.html&userId=1613865&signature=6b59dfe40f1af8f5] List rules & etiquette: www.re-wrenches.org/etiquette.htm [https://mailtrack.io/trace/link/f342e1145ed8bd312cd51c8d9538e7d40534372f?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=aaed0000f561c13d] Check out or update participant bios: www.members.re-wrenches.org [https://mailtrack.io/trace/link/b3aac2fd00cbe275bdd68323bbd3326fd7073c2c?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=b7fe990e7c6ebc5d]
--
~~~~~~~~~~~
Jeff Clearwater
VillageLab
Village Power Design
linkedin [https://mailtrack.io/trace/link/2b6554cfd6030cb29629ba73171aee87bce557b7?url=https%3A%2F%2Fwww.linkedin.com%2Fin%2Fjeff-clearwater-0622a312%2F&userId=1613865&signature=b502f02a345c328a]
www.villagelab.net [https://mailtrack.io/trace/link/eaf54fba7350e494de8685771adb3c8b610c0ce2?url=http%3A%2F%2Fwww.villagelab.net&userId=1613865&signature=a7fed555763946d9]
www.villagepowerdesign.com [https://mailtrack.io/trace/link/f35711ff79b27a2638bcbd392a1b2d9a09c7df5e?url=http%3A%2F%2Fwww.villagepowerdesign.com&userId=1613865&signature=aa4a4ddfbb35eb35]
skype - jclearwater
zoom by request
cell - 413-559-9763
~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches at lists.re-wrenches.org [mailto:RE-wrenches at lists.re-wrenches.org] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org] List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html [http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html] List rules & etiquette: www.re-wrenches.org/etiquette.htm [http://www.re-wrenches.org/etiquette.htm] Check out or update participant bios: www.members.re-wrenches.org [http://www.members.re-wrenches.org]
--
~~~~~~~~~~~
Jeff Clearwater
Village Power Design
linkedin [https://www.linkedin.com/in/jeff-clearwater-0622a312/]
www.villagepowerdesign.com [http://www.villagepowerdesign.com]
cell - 413-559-9763
~~~~~~~~~~~~~~~~~~~~~~~
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200417/03d358c0/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: jfokbgnihnjknhfn.gif
Type: image/gif
Size: 42 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200417/03d358c0/attachment.gif>
More information about the RE-Wrenches
mailing list