[RE-wrenches] Semi flexible modules

[Jeff Clearwater]

Hi Jay,

I would questions the assumption that a flexible module is called for 
for an RV.

I've had 600 Watts of traditional framed modules on my Sprinter Van for 
10 yrs now.  These are the 1.5" frames (Panasonic HIP195BA3).  I 
installed 4 rails (prosolar rail) to support the 3 modules the length of 
the van.  The rails are mounted on top of a beefy stainless steel 
Sprinter rack that attaches to the drip edge all around very securely - 
that rack can hold hundreds of pounds - and the  6 uprights that support 
it extend sllightly above the modules.

I find the strong frame edges - coupled with the uprights - clear away 
any branches I might drive into - and they hold up super well.  No need 
for flexible modules.  It does present 1.5" of wind resistance to my 
van's gas mileage - which probably costs more total energy than the 
solar produces if I drive alot but for having full power as a camper - 
nothing beats it.

Just a thought - it's those assumptions that get us every time!

Best!

Jeff

Jay wrote on 3/8/20 4:02 PM:
> Hi all,
> Especially those that do RV,
>
> Any recommendations as to semi flexible modules?  I find sun power brand, but many others saying “sun power cells”.
> Prices are of course all over the map.
>
> I am asking because a usual offgrid client bought a camper wants solar installed and the semi flexible modules seem like a better solution than framed. Lighter weight, non glass, less to break, etc
>
> If anyone has anything to share I’d like to hear about
>
> Thanks
>
> Jay
> Peltz power.
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>

-- 
~~~~~~~~~~~
Jeff Clearwater
Village Power Design
linkedin <https://www.linkedin.com/in/jeff-clearwater-0622a312/>
www.villagepowerdesign.com <http://www.villagepowerdesign.com>
cell - 413-559-9763
~~~~~~~~~~~~~~~~~~~~~~~
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200309/79a17e95/attachment.htm>