[RE-wrenches] Outback VFX upgrade question

[Jay]

Hi Allan,

FXR requires mate3S

Jay

> On Mar 7, 2020, at 5:20 PM, Sindelar Solar <Allan at sindelarsolar.com> wrote:
> 
> 
> Wrenches,
> 
> I have a client who is looking at upgrading an older off grid system that has an Outback VFX3524 inverter to 48Vnom in order to use a Blue Ion LiFePo battery. I installed the VFX about ten years ago and it has worked without any issues. The client has never had a generator and has enough array to equalize his FLA batteries with array only, so has never had or needed a Mate. If I upgrade to 48V with a new inverter, it will most likely be an FXR3048. First question: Can I use an original Mate (rather than a Mate3) to set up basic programming with a R series inverter, such as charger and LBCO settings? Second: anyone have an older FX3048 or VFX3648 for sale, if the answer to the first question is no?
> 
> Thank you, 
> 
> Allan
> 
> -- 
> Allan Sindelar
> allan at sindelarsolar.com
> NABCEP Certified PV Installation Professional
> New Mexico EE98J Journeyman Electrician
> Founder (Retired), Positive Energy, Inc.
> 505 780-2738 cell
> 
>  
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200307/7abe54c3/attachment.htm>