[RE-wrenches] Offgrid Generators?

Jerry Shafer jerrysgarage01 at gmail.com
Thu Feb 27 18:43:45 EST 2020


Ray
Look at Cummins, easy programming, it will require a battery charger for
the starter, two wire auto start and great service
Jerry

On Thu, Feb 27, 2020, 2:25 PM Ray <ray at solarray.com> wrote:

> I know we have covered this before, but I just continue to be
> disappointed with the Generac Ecogen.  Very high failure rate, and
> support is poor.  Service requires expensive on site service. Also the
> no load AC draw and programming setup is just not off grid ready at
> all.  I'm still not seeing any other great choices, though.  Here's some
> other possibilities:
>
> 1) Quality portable, like the Honda EU 7000i or Northstar with Honda
> motor.  Not the best choice especially for autostart, no propane, but at
> least they can take it in to the shop if it goes down.
>
> 2) Kubota (or MQ) diesel. expensive, and possible cold weather start
> issues?
>
> 3) 20+ kW water cooled, 1800 rpm propane model.  Overkill, expensive,
> but probably will last a really long time.
>
> 4) Similar Home standby unit, but Kohler brand.  Kohler used to be
> great, but now a days I'm not so sure.
>
> I just can't keep recommending a generator I know has been giving other
> customers trouble.  Any new ideas on this age old problem?
>
> --
> Ray Walters
> Remote Solar
> 303 505-8760
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200227/a0bf1fc6/attachment.htm>


More information about the RE-Wrenches mailing list