[RE-wrenches] Direct solar options for stock tank de icing

Roy Butler roy at four-winds-energy.com
Mon Feb 10 19:50:46 EST 2020


Gary,

Try these folks. They're based in Wisconsin and make almost everything 
in house.....I'm sure they have something that can work for you.
They know a lot about aeration and de-icing.

US Solar Mounts

https://www.ussolarmounts.us/

Roy Butler
Four Winds Renewable Energy, LLC
8902 Route 46, Arkport, NY 14807
607-324-9747  www.four-winds-energy.com


Although no trees were killed in the sending of this message,
a large number of electrons were terribly inconvenienced.

                 

On 2/10/2020 6:55 PM, Jay wrote:
> Using an air bubbler works well.
> It will make a hole in the ice formed overnight
>
> Jay
>
>> On Feb 10, 2020, at 1:30 PM, gary easton <gary at arp-solar.com> wrote:
>>
>> 
>> Hello Wrenches.
>> I have a friend in need of a way to keep stock tanks free of ice during winter months.  Has any one had any experience with direct solar options for this?
>> -- 
>> Sent from Gmail Mobile
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>




More information about the RE-Wrenches mailing list