[RE-wrenches] cheap MPPT controller

Dan Fink danbob88 at gmail.com
Wed Feb 5 23:58:51 EST 2020


Hi Jay;
I get that question all the time also. Using 2 Midnite Kids puts you in the
same price range as a Classic.
If you need UL listed, both Victron and Bluesky have one at the bottom of
your capacity range and somewhat in your price range, 50A 100Voc.
Non UL, Renogy has one that looks solid. Steca, Phocos and Samlex are all
too small on the amp side for you, but are good inexpensive products with
support.
Once you need 150Voc and more than 50A, everyone jumps up into that $600+
range.
Of course there's Amazon and Ebay for non-listed, don't expect accurate
ratings, reliability, warranty you can actually use, or any tech support.

Dan Fink
Executive Director, Buckville Energy Consulting
NABCEP PV Associate
NABCEP Certified PV System Inspector
IREC Certified Instructor™ for:
~ PV Installation Professional
~ Small Wind Installer
NABCEP Registered Continuing Education Providers
d <dan.fink at greendustrialtraining.com>anbob88 at gmail.com
970-672-4342




On Wed, Feb 5, 2020 at 4:04 PM jay <jay.peltz at gmail.com> wrote:

> HI All,
>
> I’m wondering if anyone has found a good inexpensive MPPT controller
>
> 40-80 amp
> 100-150v input
>
>
> I keep getting asked about them, and given that many are $100-200 vs
> $600-900 for the usual models, its a big difference.
>
> thanks
> jay
>
> peltz power
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200205/bea56c2c/attachment.htm>


More information about the RE-Wrenches mailing list