[RE-wrenches] SMA connection box access

[Tump]

You might find the Arctic flex or similar product from cobra w/ adequate ampacity rating using your #8 awg/ 85 A @30c
www.polarwire.com  <https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=2ahUKEwit17PWipzmAhXttlkKHZNQDFQQFjAAegQIARAC&url=http%3A%2F%2Fwww.polarwire.com%2Fpdfs%2F2-13.pdf&usg=AOvVaw1MhtmkEkqVzOlT-APGtF2J>
> On Dec 3, 2019, at 10:15 PM, Jerry Shafer <jerrysgarage01 at gmail.com> wrote:
> 
> Wrenches 
> It has always been a "no no" to modify any inverter due to warranty concerns but with the -41 if there is an issue it's only the top half of the inverter now to swap so that's a plus but l would get it in writing first anyway to be safe
> Jerry
> 
> On Tue, Dec 3, 2019, 6:05 PM frenergy <frenergy at psln.com <mailto:frenergy at psln.com>> wrote:
> Wrenchers,
> 
>             This particular install requires 6 Gauge for the AC output from a few SB7.7......-41 inverters (for voltage drop). Pretty tight for the 3/4" knock-outs in that inverter.  Any harm in using a step-drill to open it up to a 1" KO?  Any experiences with this?  I'm trying to avoid a J-box with a transition to 8 Gauge with 4-14 Polaris connectors.
> 
> Bill
> 
> Feather River Solar Electric            
> Bill Battagin, Owner
> 4291 Nelson St.
> Taylorsville, CA 95983
> 530.284.7849
> CA Lic 874049
> www.frenergy.net <http://www.frenergy.net/>
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org>
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
> 
> Check out or update participant bios:
> www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
> 
> <FRS_working_logo, 50%.JPG>_______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

> Tump at swnl.net <blocked::mailto:Tump at swnl.net%22%20%5Co%20%22blocked::mailto:Tump at swnl.net>               www.SWNL.net <blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/>
>                 Solarwinds Northernlights       
>        Serving Mid Coast Maine & Northern California
>                          207-832-7574   Cl. 610-517-8401                              
>                               Blair "TUMP" May
>                ********  MAINE'S CHARTER ********
>                       NABCEP    "Certified PV Installer" 
>    
>               ********  MAINE'S CHARTER ********
>                   Trace Xantrex "Certified" Dealer / Installer"
> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191204/afddef2c/attachment.htm>