[RE-wrenches] SMA connection box access

[William Miller]

Bill:



Increasing KO size voids warranty.  In the past, SMA might repair a dead
modified inverter, if possible, but would not exchange one.  The logistical
difference is, you have to send your modified defective inverter in and
wait instead of receiving a refurbished replacement promptly.



Wm



Miller Solar

17395 Oak Road, Atascadero, CA 93422

805-438-5600

www.millersolar.com

CA Lic. 773985



*From:* RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] *On
Behalf Of *frenergy
*Sent:* Tuesday, December 3, 2019 6:11 PM
*To:* re-wrenches at lists.re-wrenches.org
*Subject:* [RE-wrenches] SMA connection box access



Wrenchers,

            This particular install requires 6 Gauge for the AC output from
a few SB7.7......-41 inverters (for voltage drop). Pretty tight for the
3/4" knock-outs in that inverter.  Any harm in using a step-drill to open
it up to a 1" KO?  Any experiences with this?  I'm trying to avoid a J-box
with a transition to 8 Gauge with 4-14 Polaris connectors.

Bill

Feather River Solar Electric

Bill Battagin, Owner

4291 Nelson St.

Taylorsville, CA 95983

530.284.7849

CA Lic 874049

www.frenergy.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191203/2d6c4aaf/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 8424 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191203/2d6c4aaf/attachment.jpg>