[RE-wrenches] Parts List For AC Couple Disconnect

[Mark Frye]

Glenn,

OK, while I would prefer to not get into compiling code onto an ARM, my 
main question would be, how do you get the voltage value into the Arduino?

Rectify the AC voltage and then voltage divide down to the chip input pin?

Mark

On 11/2/2019 10:14 AM, Glenn Burt wrote:
> Sounds like a job for an Arduino...
>
> -Glenn
> Sent from my 'smart'phone, so please excuse typos and spelling errors.
>
> ------ Original message------
> *From: *Mark Frye
> *Date: *Sat, Nov 2, 2019 1:05 PM
> *To: *re-wrenches at lists.re-wrenches.org 
> <mailto:re-wrenches at lists.re-wrenches.org>;
> *Cc: *
> *Subject:*[RE-wrenches] Parts List For AC Couple Disconnect
>
> Folks,
>
> Can anyone share a parts list for setting up a AC couple disconnect?
>
> I want to couple a
>   non-frequency response grid-tied inverter to a
> battery based stand-alone inverter.
>
> I have only 8 amps output from the GT inverters, so can use 10A relay
> contacts.
>
> I want a device to monitor AC voltage and latch a coil on when it raises
> above a set point (250VAC). I then want a timer to release the latch
> after about 1 hour.
>
> Sound about right? Are any vendors selling such a device? How about a
> parts list from Digikey?
>
> Thanks,
>
> Mark Frye
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address:RE-wrenches at lists.re-wrenches.org  <mailto: RE-wrenches at lists.re-wrenches.org>
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org  <mailto:://www.mail-archive.com/re-wrenches at lists.re-wrenches.org>/maillist.ht  <http://maillist.ht>ml
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm  <http://www.re-wrenches.org/etiquette.htm>
>
> Check out or update participant bios:
> www.members.re-wrenches.org  <http://www.members.re-wrenches.org>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191102/1466c4cf/attachment.htm>