[RE-wrenches] Maximum Devices on Combox
Jason Szumlanski
jason at floridasolardesigngroup.com
Fri Nov 1 19:22:34 EDT 2019
I'm trying to decipher why an existing system installed by others has three
Comboxes. There are 4 XW+, 9 MPPT80, and an AGS. That sounds like 18 Xanbus
devices, so I can't figure out why they used two slaves (one for XWs and
AGS and the other for MPPT) and a third combox as master. The master has
never aggregated data properly.
I'm thinking of scrapping everything and just using a single Conext Gateway.
On Fri, Nov 1, 2019 at 11:19 AM Dave Angelini Offgrid Solar <
offgridsolar at sti.net> wrote:
> Hi Jason,
>
> The limitations are basic canbus limits. xanbus is very similar. In very
> large clusters, in an XW system comboxes are master slaved to get more
> devices. Xanbus devices are also not just one type. In other words an XW+
> is 2 devices and a mppt is one device. Also the overall length of the
> wiring is critical as in canbus. Building a large system? Time to read the
> tech notes on the Schneider website. What are you trying to design please?
>
> *Dave Angelini Offgrid Solar
> "we go where powerlines don't"
> http://members.sti.net/offgridsolar/ <http://members.sti.net/offgridsolar/>
> e-mail offgridsolar at sti.net <offgridsolar at sti.net>
> text 209 813 0060*
>
> On Fri, 1 Nov 2019 07:26:59 -0400, Jason Szumlanski <
> jason at floridasolardesigngroup.com> wrote:
>
> The Conext Combox manual states:
>
> Max. number of Xanbus
> devices: Up to 20 (depending on the device type)
>
> Does anyone know what "(depending on the device type)" means? What are the
> actual limitations?
>
>
>
> Jason Szumlanski
>
> --
>
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191101/528d089a/attachment.htm>
More information about the RE-Wrenches
mailing list