[RE-wrenches] control or AC board

[Jay]

I’d talk to kris Stone, if OB hasn’t been if any help



Jay



> On Oct 28, 2019, at 3:22 PM, toddcory at finestplanet.com wrote:
> 
> 
> wrenches,
> 
> i have a GVFX3648 that is acting weird,
> 
> rather then the mate normally showing: 
> AC <-> DC which shows the inverter's total power processing, 
> minus "AC load"  
> equals "Selling"
> 
> now the AC <-> DC shows nothing and "AC load" = "Selling" are identical (both track the same level of load and selling)
> 
> the unit is still selling, but the transformer is running hot and humming louder then normal... fet and cap temps are normal.
> 
> question:
> is this the ac board
> or the control board
> 
> i have spares for both but don't want to replace things that still work fine.
> 
> thanks,
>  
> todd
> 
> 
> 
> Sent from Finest Planet WebMail.
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191028/4b81a72f/attachment.htm>