[RE-wrenches] Snow-frame damage

[frenergy]

I've got a customer that is pushing me to lower the bottom edge of a 
multipole rack array to make it less visible from his house (which is .6 
miles away!).  Its 4 PVs in landscape, I currently have it designed with 
the lower edge at 3.5 feet off the ground which is actually questionable 
with the 2-3 feet of snow we get here sometimes. Flat ground, 25 degree 
pitch.

             If anybody has pics (or words of wisdom) of the bottom edge 
of a PV frame being ripped of due to snow not being able to shed 
properly from /this //type of installation (or pole mount would help)/, 
I would appreciate the help.

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190826/8cd9ff27/attachment.htm>