[RE-wrenches] Amphenol Connectors
Lloyd Hoffstatter
lloyd at sunstruckconsulting.com
Sun Aug 25 21:16:28 EDT 2019
Per the MC4 catalog, they don’t accept liability for any others…
Best regards,
Lloyd Hoffstatter
Sunstruck Consulting
l
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
From: Glenn Burt<mailto:glenn.burt at glbcc.com>
Sent: Sunday, August 25, 2019 8:40 PM
To: 'RE-wrenches'<mailto:re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Amphenol Connectors
I see that Canadian Solar has some official looking report from Chinese CSA stating that the Amphenol connectors they use are tested as interchangeable with MC-4… Haven’t been able to figure out what the piece of paper means, how the testing was done, or how they certified it…
From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of Jim Duncan
Sent: Sunday, August 25, 2019 7:10 PM
To: re-wrenches at lists.re-wrenches.org
Subject: Re: [RE-wrenches] Amphenol Connectors
Several years ago I disassembled an Amphenol and a MC4 connectors to find for myself what the difference was. It came down to the cross section of the O-ring. One brand was smaller than the other. Also the female component that the O-ring fit into was correspondingly different.
So in one assembly the fit was too tight but both mismatched pieces would go together with extra effort while the other the o-ring did not fit tight enough and would snap together with normal pressure. It's been a number of years since I did this but I doubt that either manufacturer would alter anything that would make new connectors not compatible with older ones.
I also recall that MC was on a tear for years, especially at trade shows, confronting any unauthorized competitor connector maker that implied that theirs were compatible with MC products.
Jim Duncan retired...
Solar Acres Farm
817.917.0527
solarguy2004 at gmail.com<mailto:solarguy2004 at gmail.com>
On 8/25/2019 5:21 PM, Mark Frye wrote:
Speaking of Tesla...
What with Walmart and (Amazon?) suing them for PV fires...
Can anyone here give a brief run down on the whole Amphenol UTX (?) defective or cross-mated connector story?
Thanks,
Mark Frye
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>
Check out or update participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org>
--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190826/6f1a5b7c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: MC4 Catalog_PV_Sol-Main-11014092_(en)_hi.pdf
Type: application/pdf
Size: 13236907 bytes
Desc: MC4 Catalog_PV_Sol-Main-11014092_(en)_hi.pdf
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190826/6f1a5b7c/attachment.pdf>
More information about the RE-Wrenches
mailing list