[RE-wrenches] 230Vac load on OB FX2524T system

[Glenn Burt]

If you are talking about two 120VAC legs, then the split phase voltage is 240V, not 230V which is what you would see as a standard in Europe not here.

 

From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of David Palumbo
Sent: Thursday, July 25, 2019 12:48 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] 230Vac load on OB FX2524T system

 

It is a standard 60Hz 230Vac unit

 

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986>  for Windows 10

 

From: Kirpal <mailto:solarworks at gmail.com> 
Sent: Thursday, July 25, 2019 12:45 PM
To: RE-wrenches <mailto:re-wrenches at lists.re-wrenches.org> 
Subject: Re: [RE-wrenches] 230Vac load on OB FX2524T system

 

Is the mini split European voltage where it is 230v line 1 to neutral......Outback makes inverters for that too.... 50 hz?

Kirpal

 

On Wed, Jul 24, 2019, 11:06 PM David Palumbo <palumbo131m at gmail.com <mailto:palumbo131m at gmail.com> > wrote:

I apologize for my ignorance on this issue, but in all my years I have never had to power a 230V load with an OutBack system before. 

A couple of quick questions. It is a 8 year old OutBack system with two FX2524T’s presently powering two 120Vac legs with no 240Vac output.

*	Homeowner is adding a Fujitsu mini split heat pump for air conditioning the home (summers are getting hot enough for AC even in northern Vermont). 
*	It uses 7.9 Amps @ 230Vac 
*	I have a OB PSX-240 Autoformer manufactured in 2008 in my inventory here. Should I use it for this application?
*	Do I wire it up just like in this schematic?
*	If so, what do I change in the programing on the Mate?  Presently it is ADV/FX/STACK  stack 1-2ph Master. Do I simply change it to  ADV/FX/STACK  stack Classic Slave?

Thanks,

Dave Palumbo, Independent Power, Hyde Park, VT

 



 

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986>  for Windows 10

 

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org> 

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 

Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190725/d4fafd4f/attachment.htm>