[RE-wrenches] Cutting rail
Chad Waits
chadwaits at netzerosolar.net
Thu Jun 13 09:07:51 EDT 2019
Handheld battery powered bandsaw. Works great. We have the DeWalt version.
Chad Waits
President/Owner Net Zero Solar
101 W. 5th St., Tucson, AZ 85705
Office: 520-207-4053
Cell: 520-270-4873
NABCEP Certified PV Installation Professional
From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> on behalf of
"James \"Jibril\" Gustafson" <djibrilfall at gmail.com>
Reply-To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Date: Thursday, June 13, 2019 at 5:20 AM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Cutting rail
Sometimes there is not enough clearance to complete the cut with the
circular saw, then I finish with a cordless Sawzall. I try not to push the
saw down, just let it do the work.
On Thu, Jun 13, 2019 at 6:02 AM James "Jibril" Gustafson
<djibrilfall at gmail.com> wrote:
> I often cut rail ends with my cordless Dewalt circular saw. It makes a nice
> straight cut, after marking the rail with a sharpie and speed square. Ear and
> Eye protection are crucial.
>
> On Wed, Jun 12, 2019 at 11:24 PM Kirpal <solarworks at gmail.com> wrote:
>> Just like the other gents mentioned...but I would add...get the saw blade
>> with 10 teeth per inch....will not clog up with the soft aluminum. You will
>> love the saw for cutting conduit too. All done relatively quietly without
>> all the jarring.
>> Kirpal
>>
>> On Wed, Jun 12, 2019, 9:32 PM frenergy <frenergy at psln.com> wrote:
>>> Any suggestions for cutting rail with a Sawzall? Many times at the end
>>> of a run of PVs there could be 5-6" of rail (in this case DPW P8). I
>>> like to use a circular saw but sometimes I don't have enough clearance
>>> once the rail and panels are installed. The sawzall works but I'm
>>> looking for a blade that doesn't load up with aluminum too fast and cuts
>>> without too much vibration. Other ideas?
>>>
>>> Thanks,
>>>
>>> Bill
>>>
>>> Feather River Solar Electric
>>> Bill Battagin, Owner
>>> 4291 Nelson St.
>>> Taylorsville, CA 95983
>>> 530.284.7849
>>> CA Lic 874049
>>> www.frenergy.net <http://www.frenergy.net>
>>>
>>>
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>>>
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>>
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> List-Archive:
>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>>
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
>>>
>>> Check out or update participant bios:
>>> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>>
_______________________________________________ List sponsored by Redwood
Alliance List Address: RE-wrenches at lists.re-wrenches.org Change listserver
email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or
update participant bios: www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190613/f4c81f75/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Transparent-Logo Signature[1].png
Type: image/png
Size: 21245 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190613/f4c81f75/attachment.png>
More information about the RE-Wrenches
mailing list